It Only Takes Ten Minutes Max To Set Up A Plug And Play Wireless Home Mesh Network
Signal degradation can occur at any time with your wireless home broadband network. You certainly will know it is happening, when it starts to slow down and even up to the point of having difficulty making any connection with any of your device. But before anything else, before you panic, please check first and make sure your broadband service is performing the way your subscription says it should.
If you think that your regular broadband wireless home network is experiencing some issues due to interference, then you can shift to setting up a wireless home mesh network. When you have thick wall building issues and large space requirements, it is important that you should understand why a traditional wireless solution don’t work.
When you get out of range with Wi-Fi, your calls may drop and your video streaming or gaming will begin to experience a lag or slowdown. As a general rule, regular Wi-Fi routers work only about 100 feet in every direction. It would be kind of difficult to decide where to place your router, because it should be near to the part of the house where most family members are likely to be logging on.
I know, buying the hardware is easy, but when it comes to getting a signal, even with the use of extenders, through a foot of brick, you better think about getting the best options in lesser cost for this kind of scenario. Wireless home systems are less expensive and less hassle than the wired ones, because these wireless home sensors can be installed almost anywhere, without paying any technician about how to get wires to them.
However, when setting up a Wi-Fi network, you need to make sure the radio waves do not run into anything that blocks the signal, such as brick, concrete, stone, water, ceramic, mirrors, and many more. Here is one trick you may use.
You can get a seamless internet in an instant when you connect a wireless home mesh network to your broadband router. Get your home online quickly and easily with all convenience and flexibility with the use of a sleek designed plug and play device in less than 10 minutes.
Wireless home mesh Wi-Fi networks are very easy to set up. It works flawlessly with a phone app and may require minimal wires. You do not need to run messy cables throughout the house to plug every unit. Connect the main unit to the modem, plug to power up the other units, and there you go, you have your wireless home mesh Wi-Fi network.
The most popular mesh covers up to 4,500 square feet. You won’t find a single router in the market that would cover as much space. Mesh networks are the new trend in wireless networks.
A mesh network consists of several routers that talk to each other so it can provide a seamless internet Wi-Fi connectivity. The plug and play wireless home mesh access has been designed for larger homes and small offices.
Traditionally, setting up a regular Wi-Fi over a large area requires sophisticated repurposing of the low end routers to minimize the high cost of dedicated access points (AP). With the mesh network, you get a seamless coverage with quick transitions from one access point to another as the device move around. Without a mesh network, you would need to set the parameters on each AP individually and connect them with a wired network or extenders.
The next time you plan to upgrade your Wi-Fi and improve your connectivity, take a bold step – go for the wireless home mesh network!